|
|
|
Trade Info
|
Supply
|
MK-312 10-Foot Wet Cutting Stone Saw
|
date：Dec 10, 2007
|
|
|
MK-312 10-Foot Wet Cutting Stone Saw
Features:
FREE MK-62M diamond blade
FREE water pump
FREE 12-inch cutting guide
45-degree to 90-degree miter cut capability
Adjustable guide can be used on both sides of the table to make exact cuts easier
Fully enclosed, direct drive 3 h.p. motor has thermal overload protection
Adjustable miter system allows cuts of any angle from 45 to 90 degrees
Stands, cutting guides and side table available
Available in 4, 6, 8 and 10-foot sizes
One year limited warranty
FREE shipping to any commercial address
[ Detail Information
] |
|
Supply
|
MK-660 Tile Saw
|
date：Dec 10, 2007
|
|
|
MK-660 Tile Saw
Features:
FREE 45-degree bullnose miter
FREE 7" blade
Motor is thermally protected
Easy to use miter fixture included
A thermoplastic water reservoir that won't rust or peel and can be removed for easy cleaning
Precision linear guide bar and cover offer a virtually maintenance-free operation
Rips 14" tile and diagonally cuts a 10" tile
High torque 3 / 4 h.p. motor
2-1 / 4" depth of cut or 1-18" on the miter
One year limited warranty
FREE shipping
[ Detail Information
] |
|
Supply
|
MK-2013HSP Wet-Cutting Concrete Saw 13 HP
|
date：Dec 10, 2007
|
|
|
MK-2013HSP Wet-Cutting Concrete Saw 13 HP
MK-20 Series Features:
One-piece box construction chassis made from 3 / 16" hot-rolled steel will not flex during operatio
Powder-coated chassis resists peeling & corrosion
Cast-aluminum hinged blade guard
Stainless steel water distribution system supplies water to both sides of blade
Blade guard mounts on both left- or right-hand side of saw and cuts within 1" of wall or curb
1-1 / 4" blade shaft supported by two heavy-duty, self-aligning pillow block bearings
Depth control assembly engineered for smooth, controlled blade insertion
Built-in tach / hour meter
Depth feed gauge indicator
Heavy-duty hydro static transmission with variable speed drive
Durable 8"x 2 1 / 4" non-slip rubber wheels with maintenance-free hubs & roller bearing
Forward travel speed: 0-80' / min
FREE 14-inch MK-799D Diamond blade
FREE lifting bail
Model MK-2013HSP
Engine Honda Cyclone
Horsepower 13
Fuel Capacity 1.7 gallons
Blade Capacity 16"
Blade RPM 3600
Arbor Size 1" (25mm)
Depth of Cut (16" blade) 5-5 / 8" (143mm)
Starter Pull
LxWxH (inches) 65" x 25" x 37"
LxWxH (mm) 1651 x 635 x 940
Weight 310 lbs.
Part # 156499
[ Detail Information
] |
|
Supply
|
MK-101 Wet-Cutting Tile Saw
|
date：Dec 10, 2007
|
|
|
MK-101 Wet-Cutting Tile Saw 1.5HP with FREE 10-inch diamond blade, FREE 10-inch diamond masonry blade, FREE 45-degree miter guide, FREE stand and FREE shipping.
Features:
FREE 10" diamond blade
Two-position cutting head
Hinged blade guard provides safe and quick blade removal
Wide enough to handle profile wheels
Linear guide bar system provides precise cutting
Rips 20" tile and diagonally cuts a 12" tile
1-1 / 2 h.p. motor
3-3 / 4" depth of cut or 1-1 / 2" on the miter
One year limited warranty
FREE 45-degree miter guide
FREE stand
FREE shipping
[ Detail Information
] |
|
Supply
|
MK RD-100 Supreme Grade
|
date：Dec 10, 2007
|
|
|
MK RD-100 Supreme Grade
Resin bond diamond blade for glass
Supreme grade
Wet-cutting
Segmented
Laser welded
Fits all tile saws (Felker, QEP, DeWalt, Huskie and Sawmaster).
Additional blade diameters and special arbors available upon request. Stock arbors can be bushed to smaller sizes; please specify at time of order.
Part No. Diameter Width Arbor List Price Your Price Order
160831 7" (178mm) .062 1" $186.00 $119.00
159326 10" (254mm) .062 1" $307.00 $199.00
157812 14" (356mm) .070 3 / 4" $917.00 $499.00
[ Detail Information
] |
|
Supply
|
MK-770 Wet-Cutting Tile Saw
|
date：Dec 10, 2007
|
|
|
MK-770 Wet-Cutting Tile Saw
Features:
FREE 7" Hot Dog blade
FREE water pump
FREE rip guide
Optional water hood
Optional stand
Optional 90-dgree protractor
Optional 45-degree flat angle guide
Built-in fully adjustable 45-degree miter system for precise mitering every time
A thermoplastic water reservoir that won't rust or peel and can be removed for easy cleaning
Linear guide bar and cover offer precise, maintenance-free operation
Rips 14" tile and diagonally cuts an 10" tile
High torque 3 / 4 h.p. motor
2-1 / 4" depth of cut or 1-1 / 8" on the miter
One year limited warranty
FREE shipping
[ Detail Information
] |
|
Supply
|
MK-370 EXP Wet-Cutting Tile Saw
|
date：Dec 10, 2007
|
|
|
MK-370 EXP Wet-Cutting Tile Saw
Features:
FREE 7" diamond blade
FREE submersible water pump
FREE rip guide
Tilting head allows for precise 45-degree miter cutting
18-inch cutting length, diagonally cuts a 13-inch tile
Powerful high-torque universal motor
Maintenance-free, self lubricating pinion and gear-box assembly
3 / 4" diameter chrome-plated linear guide-bar system
Heavy-duty on / off switch
Built-in water pump receptacle
Hinged blade guard for easy blade changes
Single piece zinc-plated steel frame for rigidity, strength and durability
Removable theroplastic water reservoir
MK-Safeswitch prevents saw from being operated when locking key is removed
One year limited warranty
FREE shipping
[ Detail Information
] |
|
Supply
|
MK-170 wet-cutting tile saw
|
date：Dec 10, 2007
|
|
|
MK-170 wet-cutting tile saw with FREE blade and FREE shipping!
Features:
FREE 7-inch diamond blade
Submersible water pump included
High-torque, universal 115V / 60hz motor
Lightweight & portable
1 / 3 horsepower
12-inch length of cut
2-inch depth of cut
High-impact thermoplastic water reservoir will not rust or peel and can be removed for easy cleaning
MK-Safeswitch prevents saw from being operated when locking key is removed
FREE shipping
[ Detail Information
] |
|
|
| Company Name: |
AJ&B Building Supply |
| Business Type: |
Wholesaler/Retailer |
| Product/Service: |
Diamond Product
|
| Company Address: |
174 W. Foothill Blvd. #331, Monvrovia, CA 91016 |
| Postal Code: |
|
| Contact Person: |
Eliana Morandi |
| Phone: |
1-800-2486555 |
| Fax: |
1-626-7687260 |
| WebSite: |
http://ajandb.stoneBTB.com |
| Inquire: |
|
|
|
|
Contact this Member