new
Submit your needs
You are here : Stone Home > Info Center > Economic Review > How to drill into cultured marble

How to drill into cultured marble

Updated:2011-09-08 17:03:39
Cultured marble  is a kind of resin training, not a natural stone for this reason, you don't need to use expensive bit design drilling granite or marble standard drill holes and sawing easily through the training marble.How to drill into cultured marble?Where you want to drill hole defined roughly you put a piece of tape and put it in the area you will pass this tape drilling.Completely open chunks of variable speed motor and into the hole drilling saw or a bit drill chuck motor.Safely get a or see your training and ready to exercise it now is a good time, use safety glasses piece of materials may be airborne when you exercise in a 90 degree Angle, use light pressure and start drilling cultured marble.Marble is easy to drill through training, you can use a standard drill bit, not an expensive one problem is the key bit should be calm in the drilling process.Drilling the most effective, you need to keep bit cool to reduce heat strengthen you can use lubricant another way to reduce it to reduce the friction material drill, and with a spray bottle filled with.Just two water spray bit and training of marble occasionally when you finish when drilling, you can use a cloth dry dishcloth or any water, oil or debris carefully remove duct tape.Wipe the surface with a clean cloth cultured marble remove excess water areas.
Stonebtb Home | About Us | Advertise | Service | Video | Terms of Service | Our Partners | Stones Yellow Pages | Contact Us | Site Map | Exchange Link
2007 - 2014 STONEBTB.com