new
or
You are here : Stone Home > Info Center > Market Analysis > Repair a Chip in a Cultured Marble Vanity Top

Repair a Chip in a Cultured Marble Vanity Top

Updated:2013-07-29 16:20:38
A chip in a cultured marble vanity top can be annoying, considering the money spent on the vanity. However, it is possible to repair the vanity top with some patience and a day’s time. The finished project will be less likely to incur further chips, as the polymer resin dries to a hard, shiny finish.

Instructions as follows:

                                           


Firstly, wipe the vanity top with a dampened sponge to thoroughly clean it.

Secondly, as a first option, fill the chip in with super glue and allow it to dry. Please keep in mind that this will not hide the chip; only fill it in. However, it will keep the chip from getting larger. If you prefer a better method that will allow the chip to be invisible, continue with the following steps.

Thirdly, sand the vanity top with medium-grit sandpaper. Sand down into the chipped area, but do not sand it down level. Wipe the vanity top with a dampened sponge to remove the dust.

Fourthly, tape along the edges of the vanity top with painter’s tape to protect adjacent surfaces. Tape around the inside of the sink as well.

Fifthly, apply a coat of primer to the vanity top according to the manufacturer’s directions. Use the small paint roller to ensure that the entire vanity is covered. Allow the primer to dry before continuing.

Sixthly, spray a thorough coat of stone finish evenly on the vanity top. Be sure to fill in the chipped area with the sandstone finish. Follow the manufacturer’s directions for the drying time, as it can vary according to different manufacturers.

Seventhly, pour some polymer resin into a disposable cup and then pour it on the vanity top, beginning with the backsplash first. Use the paint spreader to push the polymer resin back and catch drips. Cover the entire vanity top in this manner with a generous layer of polymer resin. Follow the manufacturer’s directions for the drying time for the polymer resin.

Premium Related Products
black galaxy
black galaxy
Price:Negotiation
Origin:india
Categories:Granite
Xiamen sunhelpstone co.,ltd
ChinaChina
Tan brown
Tan brown
Price:Negotiation
Origin:india
Categories:Granite
Xiamen sunhelpstone co.,ltd
ChinaChina
California Night Snow SB18
California Night Snow SB18
Price:Negotiation
Origin:China
Categories:Marble
Yunfu Sizhou Stone Co.,Ltd
ChinaChina
Browse by: Stone Manufacturers | All Products | For Buyers | For Sellers | Suppliers | Stonebtb.com International | Stonebtb.com China | Site Map
About Us | Stonebtb Service | Contact Us | Our Partners | Video | Exchange Link | Terms of Use
Copyright 2007-2018 Stonebtb.com All rights seserced