new
or
You are here : Stone Home > Info Center > Success Stories > Suggestions to Install Onyx Tiles in Bathroom

Suggestions to Install Onyx Tiles in Bathroom

Updated:2013-12-20 11:19:46
Onyx is a translucent, exotic stone that has a lot of appeal among homeowners who enjoy unique design. Onyx is a metamorphic stone, like marble, but much more fragile and delicate.

Onyx tiles are frequently reinforced with a fiberglass mesh on the back to help keep them intact; leave this mesh in place when installing to help give your installation additional strength. Onyx tiles are installed similarly both to other natural stone tiles and to glass because of its translucent nature. Take care with each step of an onyx installation to ensure the outcome you desire.

                                                       

  

                                                      

Instructions as follows:
Firstly, lay out the onyx tiles either directly onto the area being tiled, such as a floor, or in an area of equal size and shape to the area being tiled, such as a wall. Balance the installation by starting with a full tile in the center and moving outward to put cut tiles in the corners or edges of the installation. Mix the onyx tiles from several boxes at once to ensure a pleasing variation of color.
Secondly, cut the onyx on a tile wet saw to fit the edges of the installation. Take your time cutting; let the saw grind through the onyx without forcing it to avoid chips.
Thirdly, spread a layer of white thin set that has been modified with latex onto the area to be tiled. Inspect the onyx pieces before you lay each one; some tiles are extremely translucent, to avoid seeing the trowel marks through the tile, spread a thin layer of thin set directly onto the back of the onyx. Press each tile firmly and evenly into the thin set in the order you determined earlier.
Fourthly, allow the thin set to dry for up to 48 hours before sealing and grouting the onyx. Use an impregnating marble sealer and paint the onyx to protect it from grout stains. Let the sealer sit undisturbed for 10 minutes and buff it away in a circular motion using a soft, lint free cloth.
Fifthly, spread unsanded grout onto the onyx tiles with a soft rubber grout float. Scrape the grout across the tiles using the edge of the float, and press the grout between them using the flat of the float. Wait 10 minutes and clean the surface of the onyx with a slightly damp sponge to remove the excess grout from the installation.
Premium Related Products
No. C130, Stop Stone HY-A084
No. C130, Stop Stone HY-A084
Price:Negotiation
Origin:China
Categories:Granite
Xiamen Hongye Tongshang Import & Export Co., Ltd.
ChinaChina
No. C131, Stop Stone HY-A085
No. C131, Stop Stone HY-A085
Price:Negotiation
Origin:China
Categories:Granite
Xiamen Hongye Tongshang Import & Export Co., Ltd.
ChinaChina
Artificial Quartz Countertop F15
Artificial Quartz Countertop F15
Price:USD60-100 per square meter
Origin:Guangdong
Categories:Quartzite
Linxin Marble & Granite CO., LTD
ChinaChina
Browse by: Stone Manufacturers | All Products | For Buyers | For Sellers | Suppliers | Stonebtb.com International | Stonebtb.com China | Site Map
About Us | Stonebtb Service | Contact Us | Our Partners | Video | Exchange Link | Terms of Use
Copyright 2007-2018 Stonebtb.com All rights seserced